P0D67 — Battery charger control module A performance
| Meaning | The control unit that manages the traction battery charger found that the module is not working as expected. This is not an open circuit but operation outside the expected values. The exact meaning can vary between manufacturers. |
| Family | Powertrain (P) |
Typical symptoms
Slow, incomplete or interrupted charging
Charging that will not start
Charging error messages
Reduced range due to insufficient charging
Common causes
Faulty charging cable or socket
Damaged charger connectors or wiring
Unstable supply from the charging station
Missing software update
Faulty charger control unit
What to do
How to read code P0D67
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0D67 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0D67 mean?
Battery charger control module A performance. The control unit that manages the traction battery charger found that the module is not working as expected. This is not an open circuit but operation outside the expected values. The exact meaning can vary between manufacturers.
Can I keep driving with code P0D67 active?
With caution: limp mode possible, have it checked soon
Common causes — P0D67
Problem in the onboard charger Faulty charging cable or socket Damaged charger connectors or wiring Unstable supply from the charging station Missing software update Faulty charger control unit
How do you fix code P0D67?
Try charging with a different station and cable to see whether the problem is external. If the fault stays, have the onboard charger and its connections checked. It is not a driving emergency, but it can leave you unable to charge.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0D66 — Battery cooling fan enable circuit high
- Next code: P0D68 — A/C compressor motor voltage sensor A circuit faul...
Related codes
- P0D00 — Control Pilot ventilation switch circuit open
- P0D01 — Control Pilot ventilation switch signal out of range
- P0D02 — Control Pilot ventilation switch circuit low
- P0D03 — Control Pilot ventilation switch circuit high
- P0D04 — Control Pilot ventilation switch intermittent or erratic
- P0D05 — Control Pilot ventilation switch stuck off
- P0D06 — Control Pilot ventilation switch stuck on
- P0D07 — Charging system positive contactor A circuit fault
- P0D08 — Charging positive contactor A stuck closed
- P0D09 — Charging positive contactor A stuck open
- P0D0A — Charging positive contactor A control circuit open
- P0D0B — Charging positive contactor A control circuit out of range