P0D68 — A/C compressor motor voltage sensor A circuit fault
| Meaning | The control unit detected a fault in the circuit of the sensor that measures the voltage of the A/C compressor's electric motor. Hybrid and electric cars use a high-voltage compressor that the control unit must monitor. The sensor circuit is not responding as expected. |
| Family | Powertrain (P) |
Typical symptoms
A/C not cooling
Compressor not starting
Air from the vents not cold
A/C warning message
Common causes
Broken or shorted sensor wiring
Faulty voltage sensor
Failed compressor internal electronics
Moisture in the connectors
What to do
How to read code P0D68
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0D68 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0D68 mean?
A/C compressor motor voltage sensor A circuit fault. The control unit detected a fault in the circuit of the sensor that measures the voltage of the A/C compressor's electric motor. Hybrid and electric cars use a high-voltage compressor that the control unit must monitor. The sensor circuit is not responding as expected.
Can I keep driving with code P0D68 active?
With caution: limp mode possible, have it checked soon
Common causes — P0D68
Damaged or corroded compressor connector Broken or shorted sensor wiring Faulty voltage sensor Failed compressor internal electronics Moisture in the connectors
How do you fix code P0D68?
Have the compressor connectors and wiring checked. The compressor is high voltage, so checks must be done only by a workshop qualified for electric and hybrid vehicles. You can drive, but without air conditioning.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0D67 — Battery charger control module A performance
- Next code: P0D69 — A/C compressor motor voltage sensor A performance
Related codes
- P0D00 — Control Pilot ventilation switch circuit open
- P0D01 — Control Pilot ventilation switch signal out of range
- P0D02 — Control Pilot ventilation switch circuit low
- P0D03 — Control Pilot ventilation switch circuit high
- P0D04 — Control Pilot ventilation switch intermittent or erratic
- P0D05 — Control Pilot ventilation switch stuck off
- P0D06 — Control Pilot ventilation switch stuck on
- P0D07 — Charging system positive contactor A circuit fault
- P0D08 — Charging positive contactor A stuck closed
- P0D09 — Charging positive contactor A stuck open
- P0D0A — Charging positive contactor A control circuit open
- P0D0B — Charging positive contactor A control circuit out of range