Skip to content
Fault code dictionary (DTC)

P0D73 — A/C compressor control module internal temperature sensor A circuit low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit found a voltage that is too low in the internal temperature sensor circuit of the A/C compressor module. It usually points to a short to ground or a faulty sensor. The module temperature cannot be monitored reliably.
FamilyPowertrain (P)

Typical symptoms

Hybrid system or check engine light on
A/C not cooling
Compressor limited or stopped
A/C warning message
Rest of the car without problems

Common causes

Sensor wiring shorted to ground
Wet or damaged connector
Faulty temperature sensor
Failed compressor module
Faulty control unit (rare)

What to do

Have the wiring and connectors checked by a workshop qualified for high voltage. You can use the car, but without air conditioning until the fault is fixed.

How to read code P0D73

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D73 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D73 mean?

A/C compressor control module internal temperature sensor A circuit low. The control unit found a voltage that is too low in the internal temperature sensor circuit of the A/C compressor module. It usually points to a short to ground or a faulty sensor. The module temperature cannot be monitored reliably.

Can I keep driving with code P0D73 active?

With caution: limp mode possible, have it checked soon

Common causes — P0D73

Sensor wiring shorted to ground Wet or damaged connector Faulty temperature sensor Failed compressor module Faulty control unit (rare)

How do you fix code P0D73?

Have the wiring and connectors checked by a workshop qualified for high voltage. You can use the car, but without air conditioning until the fault is fixed.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes