Skip to content
Fault code dictionary (DTC)

P0D74 — A/C compressor control module internal temperature sensor A circuit intermittent

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe signal from the internal temperature sensor of the A/C compressor module drops out or varies erratically at times. The fault comes and goes and usually points to an unstable contact in the sensor circuit.
FamilyPowertrain (P)

Typical symptoms

Warning light coming on and off
A/C working intermittently
Compressor stopping and restarting
A/C warnings only occasionally
Fault appearing with vibration or heat

Common causes

Connector with unstable contacts
Chafed or damaged wiring
Moisture in the connectors
Faulty temperature sensor
Compressor module starting to fail

What to do

Have the connectors and wiring checked, including movement tests, at a workshop qualified for high voltage. It is not urgent for driving, but it tends to get worse over time.

How to read code P0D74

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D74 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D74 mean?

A/C compressor control module internal temperature sensor A circuit intermittent. The signal from the internal temperature sensor of the A/C compressor module drops out or varies erratically at times. The fault comes and goes and usually points to an unstable contact in the sensor circuit.

Can I keep driving with code P0D74 active?

With caution: limp mode possible, have it checked soon

Common causes — P0D74

Connector with unstable contacts Chafed or damaged wiring Moisture in the connectors Faulty temperature sensor Compressor module starting to fail

How do you fix code P0D74?

Have the connectors and wiring checked, including movement tests, at a workshop qualified for high voltage. It is not urgent for driving, but it tends to get worse over time.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes