Skip to content
Fault code dictionary (DTC)

P0D75 — A/C compressor control module output driver temperature sensor circuit

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe A/C compressor module has a sensor that measures the temperature of the output stages that drive the electric motor. The control unit detected a fault in this sensor's circuit. Without a reliable reading it cannot protect the module from overheating.
FamilyPowertrain (P)

Typical symptoms

Hybrid system or check engine light on
A/C not cooling
Compressor limited or disabled
A/C warning message
Rest of the car normal

Common causes

Faulty output stage temperature sensor
Damaged module connector or wiring
Failed compressor module
Moisture in the connectors
Faulty control unit (rare)

What to do

Have the connectors, wiring and module data checked at a workshop qualified for high voltage. The sensor is often built into the compressor. You can drive, but without air conditioning.

How to read code P0D75

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D75 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D75 mean?

A/C compressor control module output driver temperature sensor circuit. The A/C compressor module has a sensor that measures the temperature of the output stages that drive the electric motor. The control unit detected a fault in this sensor's circuit. Without a reliable reading it cannot protect the module from overheating.

Can I keep driving with code P0D75 active?

With caution: limp mode possible, have it checked soon

Common causes — P0D75

Faulty output stage temperature sensor Damaged module connector or wiring Failed compressor module Moisture in the connectors Faulty control unit (rare)

How do you fix code P0D75?

Have the connectors, wiring and module data checked at a workshop qualified for high voltage. The sensor is often built into the compressor. You can drive, but without air conditioning.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes