Skip to content
Fault code dictionary (DTC)

P0D77 — A/C compressor driver temperature sensor signal too high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe A/C compressor control module is receiving a higher than normal voltage from the temperature sensor on its own power stage. This can mean an open circuit, a faulty sensor, or a genuinely very high temperature. The module cannot trust the reading and usually limits or stops the compressor to protect it. Sensor location varies by manufacturer.
FamilyPowertrain (P)

Typical symptoms

Air conditioning that does not cool
A/C compressor stopped or cutting out often
Warning light on
A/C working only intermittently
Error message on the display on some models

Common causes

Broken sensor wire or disconnected connector
Faulty temperature sensor
Corroded connector contact
Internal fault in the compressor control module
Real overheating of the module
Wiring damaged by rubbing or heat

What to do

First check the connector and wiring of the compressor module, then the sensor voltage with a diagnostic tool. You can keep driving, but without air conditioning. Don't put the check off for too long.

How to read code P0D77

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D77 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D77 mean?

A/C compressor driver temperature sensor signal too high. The A/C compressor control module is receiving a higher than normal voltage from the temperature sensor on its own power stage. This can mean an open circuit, a faulty sensor, or a genuinely very high temperature. The module cannot trust the reading and usually limits or stops the compressor to protect it. Sensor location varies by manufacturer.

Can I keep driving with code P0D77 active?

With caution: limp mode possible, have it checked soon

Common causes — P0D77

Broken sensor wire or disconnected connector Faulty temperature sensor Corroded connector contact Internal fault in the compressor control module Real overheating of the module Wiring damaged by rubbing or heat

How do you fix code P0D77?

First check the connector and wiring of the compressor module, then the sensor voltage with a diagnostic tool. You can keep driving, but without air conditioning. Don't put the check off for too long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes