Skip to content
Fault code dictionary (DTC)

P0D79 — A/C compressor driver temperature sensor signal erratic

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe A/C compressor control module is reading a jumping or on-and-off signal from the temperature sensor on its own power stage. This usually points to a poor electrical contact, and more rarely to a failing sensor or module. The problem can appear and disappear, for example with vibration or temperature changes. Sensor location depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Air conditioning that works on and off
A/C compressor stopping and restarting by itself
Warning light that comes on and goes off
Cooling that differs from day to day
Problem getting worse on rough roads

Common causes

Connector with weak or corroded contact
Wiring with a partly broken wire
Temperature sensor that is starting to fail
Compressor control module with an intermittent fault
Vibration or moisture at the connector
Unstable ground or power supply to the module

What to do

Check connectors and wiring by gently wiggling the wires while watching live data. Also check the module's ground and power supply. It is not a safety urgency, but an intermittent fault tends to get worse.

How to read code P0D79

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D79 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D79 mean?

A/C compressor driver temperature sensor signal erratic. The A/C compressor control module is reading a jumping or on-and-off signal from the temperature sensor on its own power stage. This usually points to a poor electrical contact, and more rarely to a failing sensor or module. The problem can appear and disappear, for example with vibration or temperature changes. Sensor location depends on the manufacturer.

Can I keep driving with code P0D79 active?

With caution: limp mode possible, have it checked soon

Common causes — P0D79

Connector with weak or corroded contact Wiring with a partly broken wire Temperature sensor that is starting to fail Compressor control module with an intermittent fault Vibration or moisture at the connector Unstable ground or power supply to the module

How do you fix code P0D79?

Check connectors and wiring by gently wiggling the wires while watching live data. Also check the module's ground and power supply. It is not a safety urgency, but an intermittent fault tends to get worse.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes