Skip to content
Fault code dictionary (DTC)

P0D89 — Charge coupler status indicator circuit B open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe vehicle's charging connector can have more than one indicator, such as lights or status signals. The control module drives one of them through a circuit called B and has detected that the circuit is open. The code is standard, but which indicator is circuit B depends on the manufacturer. Charging often still works, but the proper signal is missing.
FamilyPowertrain (P)

Typical symptoms

Charging connector light or indicator off or not changing
Charging status indication missing or wrong
Fault warning light on
Charging error message on some models
Charging that sometimes does not start

Common causes

Broken wire in the indicator circuit
Charging connector or inlet with weak contact
Faulty indicator lamp or LED
Fault in the module driving the indicator
Damaged wiring near the charging inlet
Moisture or corrosion in the connector

What to do

Check whether the charging inlet shows moisture, dirt or damage and try charging with another cable. If charging works, you can use the car, but it is worth having the circuit checked. If charging does not start, go to a qualified workshop.

How to read code P0D89

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D89 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D89 mean?

Charge coupler status indicator circuit B open. The vehicle's charging connector can have more than one indicator, such as lights or status signals. The control module drives one of them through a circuit called B and has detected that the circuit is open. The code is standard, but which indicator is circuit B depends on the manufacturer. Charging often still works, but the proper signal is missing.

Can I keep driving with code P0D89 active?

With caution: limp mode possible, have it checked soon

Common causes — P0D89

Broken wire in the indicator circuit Charging connector or inlet with weak contact Faulty indicator lamp or LED Fault in the module driving the indicator Damaged wiring near the charging inlet Moisture or corrosion in the connector

How do you fix code P0D89?

Check whether the charging inlet shows moisture, dirt or damage and try charging with another cable. If charging works, you can use the car, but it is worth having the circuit checked. If charging does not start, go to a qualified workshop.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes