P0D8C — Charge port status indicator circuit C open
| Meaning | The control unit finds no continuity in circuit C, which drives the charge port status indicator. The connection is open, like a wire that has come loose. The indicator cannot be controlled properly. How circuit C is defined varies by manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
No light indication while charging
A charging system fault message
Charging sometimes does not start
Powertrain warning light on
Common causes
Broken wire or corroded terminal
Faulty indicator light in the port
Wiring cut or stretched near the port
Fault in the charger module
What to do
How to read code P0D8C
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0D8C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0D8C mean?
Charge port status indicator circuit C open. The control unit finds no continuity in circuit C, which drives the charge port status indicator. The connection is open, like a wire that has come loose. The indicator cannot be controlled properly. How circuit C is defined varies by manufacturer.
Can I keep driving with code P0D8C active?
With caution: limp mode possible, have it checked soon
Common causes — P0D8C
Connector unplugged or pin loose Broken wire or corroded terminal Faulty indicator light in the port Wiring cut or stretched near the port Fault in the charger module
How do you fix code P0D8C?
Check that the port connector is fully seated and clean. Charging often still works, but have the connection checked soon, since an open contact can turn intermittent.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0D8B — Charge port status indicator circuit B high voltag...
- Next code: P0D8D — Charge port status indicator circuit C low voltage
Related codes
- P0D00 — Control Pilot ventilation switch circuit open
- P0D01 — Control Pilot ventilation switch signal out of range
- P0D02 — Control Pilot ventilation switch circuit low
- P0D03 — Control Pilot ventilation switch circuit high
- P0D04 — Control Pilot ventilation switch intermittent or erratic
- P0D05 — Control Pilot ventilation switch stuck off
- P0D06 — Control Pilot ventilation switch stuck on
- P0D07 — Charging system positive contactor A circuit fault
- P0D08 — Charging positive contactor A stuck closed
- P0D09 — Charging positive contactor A stuck open
- P0D0A — Charging positive contactor A control circuit open
- P0D0B — Charging positive contactor A control circuit out of range