P0D8B — Charge port status indicator circuit B high voltage
| Meaning | The control unit measured a voltage that is too high in circuit B, which drives the charge port status indicator. The signal going to the light is outside its expected range. The exact meaning of circuit B is set by the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Indicator does not change during charging
A charging system fault message
Charging that does not start or stops
Powertrain warning light on
Common causes
Port connector damaged or with bent pins
Faulty indicator light inside the port
Fault in the charger module that drives the indicator
Wiring damaged by chafing or earlier repairs
What to do
How to read code P0D8B
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0D8B starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0D8B mean?
Charge port status indicator circuit B high voltage. The control unit measured a voltage that is too high in circuit B, which drives the charge port status indicator. The signal going to the light is outside its expected range. The exact meaning of circuit B is set by the manufacturer.
Can I keep driving with code P0D8B active?
With caution: limp mode possible, have it checked soon
Common causes — P0D8B
Indicator wire touching a power supply line Port connector damaged or with bent pins Faulty indicator light inside the port Fault in the charger module that drives the indicator Wiring damaged by chafing or earlier repairs
How do you fix code P0D8B?
Inspect the charge port and connector for bent pins, burn marks or moisture. Have the circuit checked as soon as you can, because an abnormal voltage on the wiring can damage other parts.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0D8A — Charge port status indicator circuit B low voltage
- Next code: P0D8C — Charge port status indicator circuit C open
Related codes
- P0D00 — Control Pilot ventilation switch circuit open
- P0D01 — Control Pilot ventilation switch signal out of range
- P0D02 — Control Pilot ventilation switch circuit low
- P0D03 — Control Pilot ventilation switch circuit high
- P0D04 — Control Pilot ventilation switch intermittent or erratic
- P0D05 — Control Pilot ventilation switch stuck off
- P0D06 — Control Pilot ventilation switch stuck on
- P0D07 — Charging system positive contactor A circuit fault
- P0D08 — Charging positive contactor A stuck closed
- P0D09 — Charging positive contactor A stuck open
- P0D0A — Charging positive contactor A control circuit open
- P0D0B — Charging positive contactor A control circuit out of range