P0D91 — Charge port lock control circuit open
| Meaning | The control unit finds no continuity in the circuit that controls the connector lock in the charge port. The lock prevents the plug from being pulled out during charging. With the circuit open, the car cannot command it reliably. |
| Family | Powertrain (P) |
Typical symptoms
Charging does not start
An error message at the charge port
Plug cannot be removed
Powertrain warning light on
Common causes
Broken wire or corroded terminal
Faulty lock actuator
Damaged wiring near the port
Fault in the control module
What to do
How to read code P0D91
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0D91 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0D91 mean?
Charge port lock control circuit open. The control unit finds no continuity in the circuit that controls the connector lock in the charge port. The lock prevents the plug from being pulled out during charging. With the circuit open, the car cannot command it reliably.
Can I keep driving with code P0D91 active?
With caution: limp mode possible, have it checked soon
Common causes — P0D91
Actuator connector unplugged or loose Broken wire or corroded terminal Faulty lock actuator Damaged wiring near the port Fault in the control module
How do you fix code P0D91?
Check that the port has no dirt or foreign objects and that the plug goes in properly. If charging will not start, have the circuit checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0D90 — Battery charger input frequency incorrect
- Next code: P0D92 — Charge port lock control circuit low voltage
Related codes
- P0D00 — Control Pilot ventilation switch circuit open
- P0D01 — Control Pilot ventilation switch signal out of range
- P0D02 — Control Pilot ventilation switch circuit low
- P0D03 — Control Pilot ventilation switch circuit high
- P0D04 — Control Pilot ventilation switch intermittent or erratic
- P0D05 — Control Pilot ventilation switch stuck off
- P0D06 — Control Pilot ventilation switch stuck on
- P0D07 — Charging system positive contactor A circuit fault
- P0D08 — Charging positive contactor A stuck closed
- P0D09 — Charging positive contactor A stuck open
- P0D0A — Charging positive contactor A control circuit open
- P0D0B — Charging positive contactor A control circuit out of range