Skip to content
Fault code dictionary (DTC)

P0D97 — Charge port unlock control circuit high voltage

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit measured a voltage that is too high in the circuit that commands unlocking of the charge connector. The signal to the actuator exceeds the expected range.
FamilyPowertrain (P)

Typical symptoms

Plug stays locked or unlocks on its own
An error message at the port
Charging does not start
Inconsistent lock behavior
Powertrain warning light on

Common causes

Control wire touching a power supply line
Damaged actuator connector
Faulty unlock actuator
Damaged wiring
Fault in the control module

What to do

Inspect the port for bent pins or burn marks, without forcing the plug. Have the circuit checked soon.

How to read code P0D97

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D97 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D97 mean?

Charge port unlock control circuit high voltage. The control unit measured a voltage that is too high in the circuit that commands unlocking of the charge connector. The signal to the actuator exceeds the expected range.

Can I keep driving with code P0D97 active?

With caution: limp mode possible, have it checked soon

Common causes — P0D97

Control wire touching a power supply line Damaged actuator connector Faulty unlock actuator Damaged wiring Fault in the control module

How do you fix code P0D97?

Inspect the port for bent pins or burn marks, without forcing the plug. Have the circuit checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes