P0D99 — Charge port temperature sensor A circuit fault
| Meaning | The control unit detected an electrical fault in the circuit of sensor A, which measures the charge port temperature. Without this reading it cannot tell whether the contacts are overheating during charging. For safety it may limit or stop charging. |
| Family | Powertrain (P) |
Typical symptoms
A charging system fault message
Charging does not start
Port heating up abnormally
Powertrain warning light on
Common causes
Damaged sensor wire
Faulty temperature sensor
Moisture in the port
Fault in the control module
What to do
How to read code P0D99
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0D99 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0D99 mean?
Charge port temperature sensor A circuit fault. The control unit detected an electrical fault in the circuit of sensor A, which measures the charge port temperature. Without this reading it cannot tell whether the contacts are overheating during charging. For safety it may limit or stop charging.
Can I keep driving with code P0D99 active?
With caution: limp mode possible, have it checked soon
Common causes — P0D99
Sensor connector corroded or loose Damaged sensor wire Faulty temperature sensor Moisture in the port Fault in the control module
How do you fix code P0D99?
If the port or plug feels very hot while charging, stop immediately. Otherwise have the sensor and its wiring checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0D98 — Charge port unlock control circuit performance
- Next code: P0D9A — Charge port temperature sensor A range/performance
Related codes
- P0D00 — Control Pilot ventilation switch circuit open
- P0D01 — Control Pilot ventilation switch signal out of range
- P0D02 — Control Pilot ventilation switch circuit low
- P0D03 — Control Pilot ventilation switch circuit high
- P0D04 — Control Pilot ventilation switch intermittent or erratic
- P0D05 — Control Pilot ventilation switch stuck off
- P0D06 — Control Pilot ventilation switch stuck on
- P0D07 — Charging system positive contactor A circuit fault
- P0D08 — Charging positive contactor A stuck closed
- P0D09 — Charging positive contactor A stuck open
- P0D0A — Charging positive contactor A control circuit open
- P0D0B — Charging positive contactor A control circuit out of range