P0D9A — Charge port temperature sensor A range/performance
| Meaning | The signal from charge port temperature sensor A is electrically present, but the value is not believable: for example it does not change while the port heats up, or it does not agree with other temperatures in the car. |
| Family | Powertrain (P) |
Typical symptoms
A charging fault message
Slower charging on cool days
Port heating up abnormally
Powertrain warning light on
Common causes
Weak contact in the sensor connector
Moisture or corrosion in the port
Sensor badly fitted after a repair
Port with worn contacts that overheat
Fault in the control module
What to do
How to read code P0D9A
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0D9A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0D9A mean?
Charge port temperature sensor A range/performance. The signal from charge port temperature sensor A is electrically present, but the value is not believable: for example it does not change while the port heats up, or it does not agree with other temperatures in the car.
Can I keep driving with code P0D9A active?
With caution: limp mode possible, have it checked soon
Common causes — P0D9A
Temperature sensor out of calibration or degraded Weak contact in the sensor connector Moisture or corrosion in the port Sensor badly fitted after a repair Port with worn contacts that overheat Fault in the control module
How do you fix code P0D9A?
Check whether the port or plug gets very hot while charging: if so, stop. Have the sensor and contacts checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0D99 — Charge port temperature sensor A circuit fault
- Next code: P0D9B — Charge port temperature sensor A circuit low
Related codes
- P0D00 — Control Pilot ventilation switch circuit open
- P0D01 — Control Pilot ventilation switch signal out of range
- P0D02 — Control Pilot ventilation switch circuit low
- P0D03 — Control Pilot ventilation switch circuit high
- P0D04 — Control Pilot ventilation switch intermittent or erratic
- P0D05 — Control Pilot ventilation switch stuck off
- P0D06 — Control Pilot ventilation switch stuck on
- P0D07 — Charging system positive contactor A circuit fault
- P0D08 — Charging positive contactor A stuck closed
- P0D09 — Charging positive contactor A stuck open
- P0D0A — Charging positive contactor A control circuit open
- P0D0B — Charging positive contactor A control circuit out of range