P0D9C — Charge port temperature sensor A circuit high
| Meaning | The control unit receives a signal that is too high from charge port temperature sensor A. This usually means a broken wire or a faulty sensor. The car may believe the port is extremely hot or may get no data at all. |
| Family | Powertrain (P) |
Typical symptoms
A charging fault message
Charging does not start
Port temperature read as very high
Powertrain warning light on
Common causes
Terminal corroded or loose
Faulty temperature sensor
Wire touching a power supply line
Fault in the control module
What to do
How to read code P0D9C
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0D9C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0D9C mean?
Charge port temperature sensor A circuit high. The control unit receives a signal that is too high from charge port temperature sensor A. This usually means a broken wire or a faulty sensor. The car may believe the port is extremely hot or may get no data at all.
Can I keep driving with code P0D9C active?
With caution: limp mode possible, have it checked soon
Common causes — P0D9C
Sensor wire broken or unplugged Terminal corroded or loose Faulty temperature sensor Wire touching a power supply line Fault in the control module
How do you fix code P0D9C?
Check whether the port really heats up during charging. Then have the sensor and wiring checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0D9B — Charge port temperature sensor A circuit low
- Next code: P0D9D — Charge port temperature sensor A circuit intermitt...
Related codes
- P0D00 — Control Pilot ventilation switch circuit open
- P0D01 — Control Pilot ventilation switch signal out of range
- P0D02 — Control Pilot ventilation switch circuit low
- P0D03 — Control Pilot ventilation switch circuit high
- P0D04 — Control Pilot ventilation switch intermittent or erratic
- P0D05 — Control Pilot ventilation switch stuck off
- P0D06 — Control Pilot ventilation switch stuck on
- P0D07 — Charging system positive contactor A circuit fault
- P0D08 — Charging positive contactor A stuck closed
- P0D09 — Charging positive contactor A stuck open
- P0D0A — Charging positive contactor A control circuit open
- P0D0B — Charging positive contactor A control circuit out of range