Skip to content
Fault code dictionary (DTC)

P0D9B — Charge port temperature sensor A circuit low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit receives a signal that is too low from charge port temperature sensor A. This usually means a short to ground or a faulty sensor. The car does not know the real port temperature and may limit charging.
FamilyPowertrain (P)

Typical symptoms

Charging reduced or stopped
A charging fault message
Charging does not start
Port temperature read as very low
Powertrain warning light on

Common causes

Sensor wire shorted to ground
Moisture in the sensor connector
Faulty temperature sensor
Wiring pinched or chafed
Fault in the control module

What to do

Have the sensor and wiring checked soon. Meanwhile watch whether the port heats up during charging, and stop if it gets hot.

How to read code P0D9B

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D9B starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D9B mean?

Charge port temperature sensor A circuit low. The control unit receives a signal that is too low from charge port temperature sensor A. This usually means a short to ground or a faulty sensor. The car does not know the real port temperature and may limit charging.

Can I keep driving with code P0D9B active?

With caution: limp mode possible, have it checked soon

Common causes — P0D9B

Sensor wire shorted to ground Moisture in the sensor connector Faulty temperature sensor Wiring pinched or chafed Fault in the control module

How do you fix code P0D9B?

Have the sensor and wiring checked soon. Meanwhile watch whether the port heats up during charging, and stop if it gets hot.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes