B1629 — PRNDL reverse input shorted to battery voltage
| Meaning | The control module reads battery-level voltage on the selector's reverse circuit (PRNDL) at a time when it should not be there. This code is manufacturer-defined and the precise meaning can change from brand to brand. |
| Family | Body (B) |
Typical symptoms
Dashboard shows R when it is not engaged
Parking sensors or camera active for no reason
Warning light or message
The code returns after being cleared
Common causes
Position switch with an internal short
Wiring with damaged insulation
Damaged connector
Control module fault (uncommon)
What to do
How to read code B1629
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B1629 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B1629 mean?
PRNDL reverse input shorted to battery voltage. The control module reads battery-level voltage on the selector's reverse circuit (PRNDL) at a time when it should not be there. This code is manufacturer-defined and the precise meaning can change from brand to brand.
Can I keep driving with code B1629 active?
With caution: limp mode possible, have it checked soon
Common causes — B1629
Signal wire touching a live wire Position switch with an internal short Wiring with damaged insulation Damaged connector Control module fault (uncommon)
How do you fix code B1629?
Check whether the reverse lights stay on when driving forward: they can confuse drivers behind you. Have the switch, wiring and connectors checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B1628 — PRNDL reverse input open circuit
- Next code: B1630 — PRNDL reverse input shorted to ground
Related codes
- B1600 — PATS anti-theft: no signal from ignition key transponder
- B1601 — PATS anti-theft: incorrect key code from ignition transponde...
- B1602 — PATS anti-theft: invalid key code format from transponder
- B1603 — Anti-theft indicator lamp circuit failure
- B1604 — Anti-theft indicator lamp circuit open
- B1605 — Anti-theft indicator lamp circuit shorted to battery
- B1606 — Anti-theft indicator lamp circuit shorted to ground
- B1607 — Illuminated entry input circuit failure
- B1608 — Illuminated entry input circuit open
- B1609 — Illuminated entry input shorted to battery
- B1610 — Illuminated entry input shorted to ground
- B1611 — Rear wiper mode select switch circuit failure