B1667 — Driver mirror: up/down motor stalled
| Meaning | The control unit detected that the motor tilting the driver side mirror up and down draws current but the mirror does not move. The code is manufacturer-defined and the exact meaning depends on the make. |
| Family | Body (B) |
Typical symptoms
A hum from the mirror when using the switch
The mirror stays in a position you do not need
Left-right movement may still work
Common causes
A seized internal mirror mechanism
A worn mirror motor
A connector in the door with a weak contact
A faulty mirror control switch
What to do
How to read code B1667
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B1667 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B1667 mean?
Driver mirror: up/down motor stalled. The control unit detected that the motor tilting the driver side mirror up and down draws current but the mirror does not move. The code is manufacturer-defined and the exact meaning depends on the make.
Can I keep driving with code B1667 active?
With caution: limp mode possible, have it checked soon
Common causes — B1667
A mirror blocked by ice, dirt or impact A seized internal mirror mechanism A worn mirror motor A connector in the door with a weak contact A faulty mirror control switch
How do you fix code B1667?
Try moving the mirror with the switch and see whether it is blocked by ice or dirt. While the mirror stays well adjusted you can drive, but if you cannot see properly behind you, have it repaired before using the car.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B1666 — Driver seat: recline motor stalled
- Next code: B1668 — Driver mirror: left/right motor stalled
Related codes
- B1600 — PATS anti-theft: no signal from ignition key transponder
- B1601 — PATS anti-theft: incorrect key code from ignition transponde...
- B1602 — PATS anti-theft: invalid key code format from transponder
- B1603 — Anti-theft indicator lamp circuit failure
- B1604 — Anti-theft indicator lamp circuit open
- B1605 — Anti-theft indicator lamp circuit shorted to battery
- B1606 — Anti-theft indicator lamp circuit shorted to ground
- B1607 — Illuminated entry input circuit failure
- B1608 — Illuminated entry input circuit open
- B1609 — Illuminated entry input shorted to battery
- B1610 — Illuminated entry input shorted to ground
- B1611 — Rear wiper mode select switch circuit failure