B1668 — Driver mirror: left/right motor stalled
| Meaning | The control unit detected that the motor moving the driver side mirror left and right draws current but the mirror does not move. The code is manufacturer-defined and details depend on the make. |
| Family | Body (B) |
Typical symptoms
A hum from the mirror when using the switch
The mirror stays in a fixed position
Up-down movement may still work
Common causes
A seized internal mechanism
A worn mirror motor
A connector in the door with a weak contact
A faulty mirror control switch
What to do
How to read code B1668
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B1668 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B1668 mean?
Driver mirror: left/right motor stalled. The control unit detected that the motor moving the driver side mirror left and right draws current but the mirror does not move. The code is manufacturer-defined and details depend on the make.
Can I keep driving with code B1668 active?
With caution: limp mode possible, have it checked soon
Common causes — B1668
A mirror blocked by ice, dirt or impact A seized internal mechanism A worn mirror motor A connector in the door with a weak contact A faulty mirror control switch
How do you fix code B1668?
Try the switch and check that the mirror is not blocked by ice or a knock. If you cannot see well behind you on the driver side, have it fixed before driving.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B1667 — Driver mirror: up/down motor stalled
- Next code: B1669 — Passenger mirror: up/down motor stalled
Related codes
- B1600 — PATS anti-theft: no signal from ignition key transponder
- B1601 — PATS anti-theft: incorrect key code from ignition transponde...
- B1602 — PATS anti-theft: invalid key code format from transponder
- B1603 — Anti-theft indicator lamp circuit failure
- B1604 — Anti-theft indicator lamp circuit open
- B1605 — Anti-theft indicator lamp circuit shorted to battery
- B1606 — Anti-theft indicator lamp circuit shorted to ground
- B1607 — Illuminated entry input circuit failure
- B1608 — Illuminated entry input circuit open
- B1609 — Illuminated entry input shorted to battery
- B1610 — Illuminated entry input shorted to ground
- B1611 — Rear wiper mode select switch circuit failure