P007A — Charge air cooler temperature sensor: circuit fault
| Meaning | The control unit found a general problem in the circuit of the sensor that measures air temperature after the intercooler, possibly on bank 1. Without this reading it cannot properly calculate the amount of boosted air. The code does not say whether the fault is electrical or in the sensor itself. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power when accelerating
Turbo that feels less responsive
Darker exhaust smoke
Uneven running under load
Common causes
Dirty or corroded sensor connector
Damaged or chafed wiring
Air leak in the intercooler pipes near the sensor
Engine control unit with a faulty input (rare)
What to do
How to read code P007A
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P007A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (7A) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P007A mean?
Charge air cooler temperature sensor: circuit fault. The control unit found a general problem in the circuit of the sensor that measures air temperature after the intercooler, possibly on bank 1. Without this reading it cannot properly calculate the amount of boosted air. The code does not say whether the fault is electrical or in the sensor itself.
Can I keep driving with code P007A active?
With caution: limp mode possible, have it checked soon
Common causes — P007A
Faulty charge air temperature sensor Dirty or corroded sensor connector Damaged or chafed wiring Air leak in the intercooler pipes near the sensor Engine control unit with a faulty input (rare)
How do you fix code P007A?
Inspect the sensor connector and wires, and check that the air pipes are intact. The car can usually be driven, but with less power, so have it checked within a few days.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0079 — Exhaust valve control solenoid, bank 1: circuit lo...
- Next code: P007B — Charge air cooler temperature sensor: implausible...
Related codes
- P0001 — Fuel Volume Regulator Control Circuit Open
- P0002 — Fuel volume regulator performance out of range
- P0003 — Fuel volume regulator control circuit low
- P0004 — Fuel volume regulator control circuit high
- P0005 — Fuel shutoff valve control circuit fault
- P0006 — Fuel shutoff valve control circuit low
- P0007 — Fuel shutoff valve control circuit high
- P0008 — Engine position system performance, bank 1
- P0009 — Engine position system performance, bank 2
- P000A — Camshaft A position slow response, bank 1
- P000B — Camshaft B position slow response, bank 1
- P000C — Camshaft A position slow response, bank 2