P007F — Charge air cooler temperature sensors: banks disagree
| Meaning | The control unit compares the intercooler outlet air temperature sensors of the two banks and finds too large a difference. One of the sensors, or the circuit on one bank, is probably giving a wrong reading. The code does not say which one. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power
Uneven power delivery
Higher fuel use
Banks that seem to behave differently
Common causes
Connector or wiring of one sensor in poor condition
Intercooler or duct on one bank dirty or leaking
Sensor poorly fitted or poorly sealed
Engine control unit with a faulty input (rare)
What to do
How to read code P007F
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P007F starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (7F) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P007F mean?
Charge air cooler temperature sensors: banks disagree. The control unit compares the intercooler outlet air temperature sensors of the two banks and finds too large a difference. One of the sensors, or the circuit on one bank, is probably giving a wrong reading. The code does not say which one.
Can I keep driving with code P007F active?
With caution: limp mode possible, have it checked soon
Common causes — P007F
One of the two sensors inaccurate or faulty Connector or wiring of one sensor in poor condition Intercooler or duct on one bank dirty or leaking Sensor poorly fitted or poorly sealed Engine control unit with a faulty input (rare)
How do you fix code P007F?
Check both sensors and their connectors, comparing the condition of each. Have the car checked soon, as the control unit is working with unreliable data.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P007E — Charge air cooler temperature sensor: erratic sign...
- Next code: P0080 — Exhaust valve control solenoid, bank 1: circuit hi...
Related codes
- P0001 — Fuel Volume Regulator Control Circuit Open
- P0002 — Fuel volume regulator performance out of range
- P0003 — Fuel volume regulator control circuit low
- P0004 — Fuel volume regulator control circuit high
- P0005 — Fuel shutoff valve control circuit fault
- P0006 — Fuel shutoff valve control circuit low
- P0007 — Fuel shutoff valve control circuit high
- P0008 — Engine position system performance, bank 1
- P0009 — Engine position system performance, bank 2
- P000A — Camshaft A position slow response, bank 1
- P000B — Camshaft B position slow response, bank 1
- P000C — Camshaft A position slow response, bank 2