P00A5 — Intake air temperature sensor 2 circuit fault (bank 2)
| Meaning | The control unit detected a problem in the electrical circuit of the second intake air temperature sensor on bank 2. This is a generic circuit code: it says the signal is not correct, but not whether it is too high, too low or unstable. The neighbouring codes or a direct measurement are needed to find the exact type of fault. |
| Family | Powertrain (P) |
Typical symptoms
Slightly harder cold starts
Rough idle
Reduced performance
Slightly higher fuel consumption
Common causes
Broken or shorted wiring
Faulty temperature sensor
Supply or ground problem at the sensor
Engine control unit fault (rare)
What to do
How to read code P00A5
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P00A5 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (A5) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P00A5 mean?
Intake air temperature sensor 2 circuit fault (bank 2). The control unit detected a problem in the electrical circuit of the second intake air temperature sensor on bank 2. This is a generic circuit code: it says the signal is not correct, but not whether it is too high, too low or unstable. The neighbouring codes or a direct measurement are needed to find the exact type of fault.
Can I keep driving with code P00A5 active?
With caution: limp mode possible, have it checked soon
Common causes — P00A5
Damaged or corroded sensor connector Broken or shorted wiring Faulty temperature sensor Supply or ground problem at the sensor Engine control unit fault (rare)
How do you fix code P00A5?
Visually check the sensor, its connector and the wires on bank 2. You can usually keep driving, but have the sensor data read soon, because the control unit may be using fallback values and running the engine less precisely.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P00A4 — Charge air temperature sensor signal erratic (bank...
- Next code: P00A6 — Intake air temperature sensor 2 reading implausibl...
Related codes
- P0001 — Fuel Volume Regulator Control Circuit Open
- P0002 — Fuel volume regulator performance out of range
- P0003 — Fuel volume regulator control circuit low
- P0004 — Fuel volume regulator control circuit high
- P0005 — Fuel shutoff valve control circuit fault
- P0006 — Fuel shutoff valve control circuit low
- P0007 — Fuel shutoff valve control circuit high
- P0008 — Engine position system performance, bank 1
- P0009 — Engine position system performance, bank 2
- P000A — Camshaft A position slow response, bank 1
- P000B — Camshaft B position slow response, bank 1
- P000C — Camshaft A position slow response, bank 2