Skip to content
Fault code dictionary (DTC)

P00FE — EVAP system: tank vapor line restricted or blocked

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer detected that the line carrying fuel vapor from the tank to the vapor recovery (EVAP) system is restricted or blocked. Vapor is not flowing as it should and the system cannot dispose of it properly.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Difficulty refuelling, with the pump clicking off
Fuel smell near the car
Fuel tank swelling or deforming
No other obvious symptom

Common causes

Vapor hose pinched, kinked or blocked
Clogged valve or fitting in the line
Stuck purge or vent solenoid
Dirt or insects in the vent line
Clogged charcoal canister

What to do

Have the route of the vapor line inspected, from the tank to the charcoal canister, along with the connected valves. It is not usually an immediate danger, but if you smell strong fuel have it checked right away.

How to read code P00FE

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P00FE starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (FE) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P00FE mean?

EVAP system: tank vapor line restricted or blocked. The engine computer detected that the line carrying fuel vapor from the tank to the vapor recovery (EVAP) system is restricted or blocked. Vapor is not flowing as it should and the system cannot dispose of it properly.

Can I keep driving with code P00FE active?

With caution: limp mode possible, have it checked soon

Common causes — P00FE

Vapor hose pinched, kinked or blocked Clogged valve or fitting in the line Stuck purge or vent solenoid Dirt or insects in the vent line Clogged charcoal canister

How do you fix code P00FE?

Have the route of the vapor line inspected, from the tank to the charcoal canister, along with the connected valves. It is not usually an immediate danger, but if you smell strong fuel have it checked right away.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes