Skip to content
Fault code dictionary (DTC)

P0191 — Fuel Rail Pressure Sensor Circuit Range/Performance

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer has noticed that the signal coming from the fuel rail pressure sensor does not match the expected value for the current engine conditions. This means the sensor is either reading incorrectly, or the actual pressure in the fuel system is unstable.
FamilyPowertrain (P)

Typical symptoms

Engine is hard to start, especially when warm
Engine surges or lacks power during acceleration
Check Engine light is on

Common causes

Faulty fuel rail pressure sensor
Wiring or connector damage in the sensor circuit
Weak fuel pump or clogged fuel filter
Internal fuel pressure regulator failure

What to do

Have a technician check the physical fuel pressure with a mechanical gauge to see if the sensor is lying. It is best to address this soon before it leaves you stranded with a no-start condition.

How to read code P0191

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code P0191 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (91) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0191 mean?

Fuel Rail Pressure Sensor Circuit Range/Performance. The engine computer has noticed that the signal coming from the fuel rail pressure sensor does not match the expected value for the current engine conditions. This means the sensor is either reading incorrectly, or the actual pressure in the fuel system is unstable.

Can I keep driving with code P0191 active?

With caution: limp mode possible, have it checked soon

Common causes — P0191

Faulty fuel rail pressure sensor Wiring or connector damage in the sensor circuit Weak fuel pump or clogged fuel filter Internal fuel pressure regulator failure

How do you fix code P0191?

Have a technician check the physical fuel pressure with a mechanical gauge to see if the sensor is lying. It is best to address this soon before it leaves you stranded with a no-start condition.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes