Skip to content
Fault code dictionary (DTC)

P01DD — Cylinder 10 injection timing too retarded

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected that fuel injection in cylinder 10 happens later than the commanded moment. Fuel enters when combustion should already have started and the cylinder performs worse. The code reports the delay but does not by itself identify the part at fault.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Rough engine operation
Lack of power under load
Hesitation when accelerating
Dark smoke or fuel smell from the exhaust
Vibration at idle

Common causes

Cylinder 10 injector slow, dirty or worn
Damaged injector wiring or connector
Low or unstable fuel pressure
Wrong signal from the crankshaft or camshaft sensors
Engine timing out of position
Internal control unit fault, which is rare

What to do

First check the wiring and connector of the cylinder 10 injector, then the fuel pressure and live data. Avoid replacing the injector without testing it. It is best to have the car inspected soon and to avoid heavy engine loads.

How to read code P01DD

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P01DD starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (DD) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P01DD mean?

Cylinder 10 injection timing too retarded. The control unit detected that fuel injection in cylinder 10 happens later than the commanded moment. Fuel enters when combustion should already have started and the cylinder performs worse. The code reports the delay but does not by itself identify the part at fault.

Can I keep driving with code P01DD active?

With caution: limp mode possible, have it checked soon

Common causes — P01DD

Cylinder 10 injector slow, dirty or worn Damaged injector wiring or connector Low or unstable fuel pressure Wrong signal from the crankshaft or camshaft sensors Engine timing out of position Internal control unit fault, which is rare

How do you fix code P01DD?

First check the wiring and connector of the cylinder 10 injector, then the fuel pressure and live data. Avoid replacing the injector without testing it. It is best to have the car inspected soon and to avoid heavy engine loads.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes