P0471 — Exhaust pressure sensor: implausible value
Severity: Warning
Can you drive? With caution: limp mode possible, have it checked soon
Make: All makes (OBD-II standard)
| Meaning | The sensor measuring exhaust pressure reports a value that does not agree with the other data. It is the sensor the entire particulate filter strategy relies on. |
| Family | Powertrain (P) |
Typical symptoms
Engine warning light on
Regeneration never starting or never finishing
Reduced power
Filter-full message on a clean filter
Regeneration never starting or never finishing
Reduced power
Filter-full message on a clean filter
Common causes
Measuring pipes blocked with soot or disconnected
Sensor failed with age
Corroded connector
Genuinely clogged filter
Sensor failed with age
Corroded connector
Genuinely clogged filter
What to do
Before touching the filter, remove the small pipes and check they are clear: it is the most common fault and takes half an hour. A DPF replaced because of a blocked pipe is the most expensive mistake possible on this code.
Frequently asked questions
What does code P0471 mean?
Exhaust pressure sensor: implausible value. The sensor measuring exhaust pressure reports a value that does not agree with the other data. It is the sensor the entire particulate filter strategy relies on.
Can I keep driving with code P0471 active?
With caution: limp mode possible, have it checked soon
Common causes — P0471
Measuring pipes blocked with soot or disconnected Sensor failed with age Corroded connector Genuinely clogged filter
How do you fix code P0471?
Before touching the filter, remove the small pipes and check they are clear: it is the most common fault and takes half an hour. A DPF replaced because of a blocked pipe is the most expensive mistake possible on this code.
Need help with this fault?
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Contact us
Where to get it fixed
Related codes
- P0400 — Exhaust Gas Recirculation Flow Malfunction
- P0401 — EGR: insufficient recirculation flow
- P0402 — EGR: excessive recirculation flow
- P0403 — EGR control circuit
- P0404 — EGR: control circuit range/performance
- P0405 — Exhaust Gas Recirculation Sensor A Circuit Low
- P0406 — Exhaust Gas Recirculation Sensor A Circuit High
- P0407 — Exhaust Gas Recirculation Sensor B Circuit Low
- P0408 — Exhaust Gas Recirculation Sensor B Circuit High
- P0409 — Exhaust Gas Recirculation Sensor A Circuit
- P040B — EXHAUST GAS RECIRCULATION TEMPERATURE SENSOR 1 CIRCUIT PERFO...
- P040C — EXHAUST GAS RECIRCULATION TEMPERATURE SENSOR 1 CIRCUIT LOW