Skip to content
Fault code dictionary (DTC)

P040B — EGR temperature sensor 1 circuit performance

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is getting a value from EGR temperature sensor 1 that doesn't change as it should or doesn't agree with the other engine temperatures. The electrical circuit isn't reported as open; the behavior of the signal is what is suspect. This prevents the unit from checking that the exhaust gas recirculation is working correctly.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Higher emissions
Rough idle in some cases
Slight loss of power
Fuel consumption higher than normal
No obvious symptoms in the early stages

Common causes

EGR temperature sensor fouled with soot or aged
EGR valve stuck or working poorly, not letting gas through
Clogged or faulty EGR cooler
Connector or wiring with abnormal resistance
Sensor incorrectly fitted
Control unit fault, which is rare

What to do

Have a diagnostic tool check whether the temperature rises when the EGR valve opens, and have the valve and passages inspected. It is not usually urgent, but don't put it off for months.

How to read code P040B

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P040B starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (0B) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P040B mean?

EGR temperature sensor 1 circuit performance. The control unit is getting a value from EGR temperature sensor 1 that doesn't change as it should or doesn't agree with the other engine temperatures. The electrical circuit isn't reported as open; the behavior of the signal is what is suspect. This prevents the unit from checking that the exhaust gas recirculation is working correctly.

Can I keep driving with code P040B active?

With caution: limp mode possible, have it checked soon

Common causes — P040B

EGR temperature sensor fouled with soot or aged EGR valve stuck or working poorly, not letting gas through Clogged or faulty EGR cooler Connector or wiring with abnormal resistance Sensor incorrectly fitted Control unit fault, which is rare

How do you fix code P040B?

Have a diagnostic tool check whether the temperature rises when the EGR valve opens, and have the valve and passages inspected. It is not usually urgent, but don't put it off for months.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes