Skip to content
Fault code dictionary (DTC)

P0B0D — Auxiliary transmission fluid pump motor control module fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has detected a problem in the electronic module that drives the auxiliary transmission fluid pump. This module switches on and regulates the pump, which keeps the oil pressurised when the engine is off. If the module is not working properly, the pump may not start or may run erratically.
FamilyPowertrain (P)

Typical symptoms

Engine light or hybrid/transmission warning light on
Gearbox engaging poorly or late after an engine stop
Start&stop or electric drive mode disabled
Uncertain restart in town driving
Car in protection mode with reduced performance

Common causes

Faulty pump control module
Module connector corroded or making poor contact
Damaged supply or communication wiring
Unstable supply voltage from a weak battery
Communication error with the main control unit
Moisture inside the module

What to do

Have the pump data read with a full diagnosis and check the module's supply, grounds and connectors before suspecting the module itself. If the gearbox behaves abnormally, don't put the check off.

How to read code P0B0D

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0B0D starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (0D) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0B0D mean?

Auxiliary transmission fluid pump motor control module fault. The control unit has detected a problem in the electronic module that drives the auxiliary transmission fluid pump. This module switches on and regulates the pump, which keeps the oil pressurised when the engine is off. If the module is not working properly, the pump may not start or may run erratically.

Can I keep driving with code P0B0D active?

With caution: limp mode possible, have it checked soon

Common causes — P0B0D

Faulty pump control module Module connector corroded or making poor contact Damaged supply or communication wiring Unstable supply voltage from a weak battery Communication error with the main control unit Moisture inside the module

How do you fix code P0B0D?

Have the pump data read with a full diagnosis and check the module's supply, grounds and connectors before suspecting the module itself. If the gearbox behaves abnormally, don't put the check off.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes