Skip to content
Fault code dictionary (DTC)

P0B34 — High-voltage service disconnect circuit performance fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit found that the service disconnect circuit is not behaving as expected, although it is not clearly open or shorted. The signal may be weak, slow or inconsistent. The system may limit or shut off the high voltage as a precaution.
FamilyPowertrain (P)

Typical symptoms

Hybrid or electric system warning light on
Uncertain starting or car sometimes will not enter Ready
Occasional loss of electric power
Problem that comes and goes
Charging stops for no clear reason

Common causes

Disconnect contacts partly corroded or worn
Connector not fully seated
Abnormal resistance in the circuit wiring
Aged or faulty service disconnect
Reading error in the control unit

What to do

Do not work on the disconnect unless you are trained, as it is part of the high-voltage system. Have the connector and contacts checked and the circuit signal measured. An intermittent fault can leave you stranded, so do not put it off for long.

How to read code P0B34

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0B34 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (34) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0B34 mean?

High-voltage service disconnect circuit performance fault. The control unit found that the service disconnect circuit is not behaving as expected, although it is not clearly open or shorted. The signal may be weak, slow or inconsistent. The system may limit or shut off the high voltage as a precaution.

Can I keep driving with code P0B34 active?

With caution: limp mode possible, have it checked soon

Common causes — P0B34

Disconnect contacts partly corroded or worn Connector not fully seated Abnormal resistance in the circuit wiring Aged or faulty service disconnect Reading error in the control unit

How do you fix code P0B34?

Do not work on the disconnect unless you are trained, as it is part of the high-voltage system. Have the connector and contacts checked and the circuit signal measured. An intermittent fault can leave you stranded, so do not put it off for long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes