P0B37 — High-voltage service disconnect open
| Meaning | The control unit sees the service disconnect as open, meaning the high-voltage battery is isolated from the rest of the car. This may be true, if it was removed during work, or it may be a false reading caused by a fault. With the circuit open the system cannot enable the high voltage. |
| Family | Powertrain (P) |
Typical symptoms
Car will not enter Ready
No electric drive
Charging not possible
High-voltage system disabled message
Common causes
Disconnect poorly seated or with corroded contacts
Break in the control circuit wiring
Faulty service disconnect
Loose connector
What to do
How to read code P0B37
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0B37 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (37) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0B37 mean?
High-voltage service disconnect open. The control unit sees the service disconnect as open, meaning the high-voltage battery is isolated from the rest of the car. This may be true, if it was removed during work, or it may be a false reading caused by a fault. With the circuit open the system cannot enable the high voltage.
Can I keep driving with code P0B37 active?
With caution: limp mode possible, have it checked soon
Common causes — P0B37
Disconnect removed or not refitted after work Disconnect poorly seated or with corroded contacts Break in the control circuit wiring Faulty service disconnect Loose connector
How do you fix code P0B37?
If the car was recently in a workshop, ask them to confirm the disconnect was put back properly. Do not try to insert or remove it yourself because of the risk of severe electric shock. If no one has worked on it, a qualified technician needs to diagnose it.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0B36 — High-voltage service disconnect circuit signal hig...
- Next code: P0B38 — Motor electronics coolant pump B control circuit o...
Related codes
- P0B00 — Electric transmission fluid pump: phase U current fault
- P0B01 — Electric transmission fluid pump: phase U current too low
- P0B02 — Electric transmission fluid pump: phase U current too high
- P0B03 — Electric transmission fluid pump: phase V current fault
- P0B04 — Electric transmission fluid pump: phase V current too low
- P0B05 — Electric transmission fluid pump: phase V current too high
- P0B06 — Electric transmission fluid pump: phase W current fault
- P0B07 — Electric transmission fluid pump: phase W current too low
- P0B08 — Electric transmission fluid pump: phase W current too high
- P0B09 — Electric transmission fluid pump A: motor supply circuit ope...
- P0B0A — Auxiliary transmission fluid pump A: supply voltage too low
- P0B0B — Auxiliary transmission fluid pump A: supply voltage too high