Skip to content
Fault code dictionary (DTC)

P0B44 — Hybrid/EV battery voltage sense B circuit intermittent/erratic

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit receives from the battery voltage sense B circuit a signal that jumps, drops out or is inconsistent at times. This usually points to an unstable contact rather than a fixed fault. Sense B is defined by the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Hybrid or electric warning light coming on and off
Power dropping now and then
Charge gauge jumping
Problem appearing with vibration or over bumps
Car sometimes will not enter Ready

Common causes

Loose connector or corroded contacts
Wiring with a partly broken wire
Measuring board with an intermittent defect
Vibration moving a connection in the pack
Intermittent fault in the control unit

What to do

An intermittent fault is hard to track: note when it appears and tell the technician. The check starts with connectors and wiring, tested under vibration. Do not touch high-voltage parts and do not ignore it, as it can get worse.

How to read code P0B44

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0B44 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (44) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0B44 mean?

Hybrid/EV battery voltage sense B circuit intermittent/erratic. The control unit receives from the battery voltage sense B circuit a signal that jumps, drops out or is inconsistent at times. This usually points to an unstable contact rather than a fixed fault. Sense B is defined by the manufacturer.

Can I keep driving with code P0B44 active?

With caution: limp mode possible, have it checked soon

Common causes — P0B44

Loose connector or corroded contacts Wiring with a partly broken wire Measuring board with an intermittent defect Vibration moving a connection in the pack Intermittent fault in the control unit

How do you fix code P0B44?

An intermittent fault is hard to track: note when it appears and tell the technician. The check starts with connectors and wiring, tested under vibration. Do not touch high-voltage parts and do not ignore it, as it can get worse.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes