P0B45 — Hybrid/EV battery voltage sense C circuit fault
| Meaning | The control unit detected a problem in the circuit that measures high-voltage battery voltage, labeled sensor C. Which part of the battery sensor C covers is decided by the manufacturer. Without a reliable measurement the system cannot safely manage charging and discharging. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or limp mode
Inconsistent charge gauge
Limited charging or regenerative braking
Car will not enter Ready
Common causes
Faulty battery monitoring board
Corroded pack contacts
Fault in the battery management unit
Cell or module behaving abnormally
What to do
How to read code P0B45
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0B45 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (45) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0B45 mean?
Hybrid/EV battery voltage sense C circuit fault. The control unit detected a problem in the circuit that measures high-voltage battery voltage, labeled sensor C. Which part of the battery sensor C covers is decided by the manufacturer. Without a reliable measurement the system cannot safely manage charging and discharging.
Can I keep driving with code P0B45 active?
With caution: limp mode possible, have it checked soon
Common causes — P0B45
Damaged wiring or connector at the sensor Faulty battery monitoring board Corroded pack contacts Fault in the battery management unit Cell or module behaving abnormally
How do you fix code P0B45?
Do not open the battery pack or touch orange cables: a qualified technician is needed. Have the wiring, connectors and sensor values checked with a scan tool suited to your brand. Avoid using the car for long with the fault active.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0B44 — Hybrid/EV battery voltage sense B circuit intermit...
- Next code: P0B46 — HV battery voltage sensor C: signal out of range
Related codes
- P0B00 — Electric transmission fluid pump: phase U current fault
- P0B01 — Electric transmission fluid pump: phase U current too low
- P0B02 — Electric transmission fluid pump: phase U current too high
- P0B03 — Electric transmission fluid pump: phase V current fault
- P0B04 — Electric transmission fluid pump: phase V current too low
- P0B05 — Electric transmission fluid pump: phase V current too high
- P0B06 — Electric transmission fluid pump: phase W current fault
- P0B07 — Electric transmission fluid pump: phase W current too low
- P0B08 — Electric transmission fluid pump: phase W current too high
- P0B09 — Electric transmission fluid pump A: motor supply circuit ope...
- P0B0A — Auxiliary transmission fluid pump A: supply voltage too low
- P0B0B — Auxiliary transmission fluid pump A: supply voltage too high