P0B87 — HV battery voltage sensor 'P': implausible reading
| Meaning | The controller found that the signal from measuring circuit P of the traction battery does not match what is expected or what the other circuits report. The fault can be in the sensor, the wires or the measurement. The cell group tied to the letter P depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power
State-of-charge display that jumps
Combustion engine stepping in often
Car struggling to enter drive-ready mode
Common causes
Sensing wire with abnormal resistance
Real imbalance between cells or modules
Internal fault in the battery controller
Corrosion or moisture in the pack
What to do
How to read code P0B87
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0B87 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (87) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0B87 mean?
HV battery voltage sensor 'P': implausible reading. The controller found that the signal from measuring circuit P of the traction battery does not match what is expected or what the other circuits report. The fault can be in the sensor, the wires or the measurement. The cell group tied to the letter P depends on the manufacturer.
Can I keep driving with code P0B87 active?
With caution: limp mode possible, have it checked soon
Common causes — P0B87
Corroded or poorly seated connector Sensing wire with abnormal resistance Real imbalance between cells or modules Internal fault in the battery controller Corrosion or moisture in the pack
How do you fix code P0B87?
Do not work on high voltage without qualification. Have a scan tool compare this circuit's voltage with its neighbours, to tell a false reading from a truly unbalanced battery. It is best not to wait, as power may drop.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0B86 — HV battery voltage sensor 'P': circuit fault
- Next code: P0B88 — HV battery voltage sensor 'P': signal too low
Related codes
- P0B00 — Electric transmission fluid pump: phase U current fault
- P0B01 — Electric transmission fluid pump: phase U current too low
- P0B02 — Electric transmission fluid pump: phase U current too high
- P0B03 — Electric transmission fluid pump: phase V current fault
- P0B04 — Electric transmission fluid pump: phase V current too low
- P0B05 — Electric transmission fluid pump: phase V current too high
- P0B06 — Electric transmission fluid pump: phase W current fault
- P0B07 — Electric transmission fluid pump: phase W current too low
- P0B08 — Electric transmission fluid pump: phase W current too high
- P0B09 — Electric transmission fluid pump A: motor supply circuit ope...
- P0B0A — Auxiliary transmission fluid pump A: supply voltage too low
- P0B0B — Auxiliary transmission fluid pump A: supply voltage too high