Skip to content
Fault code dictionary (DTC)

P0B99 — HV battery voltage sense circuit S: intermittent or erratic

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe hybrid/EV battery control unit saw the signal from sense circuit "S" drop in and out or swing in an unrealistic way. The letter S identifies a monitored cell group, and which one depends on the manufacturer. An intermittent fault like this usually points to a contact that breaks with vibration or temperature changes.
FamilyPowertrain (P)

Typical symptoms

Hybrid system warning light coming and going
Sudden, brief power drops
Charge gauge jumping
Problem appearing on rough roads or when cold or hot
System sometimes back to normal after switching off

Common causes

Loose connector or corroded terminals
Damaged or chafed sensing wire
Vibration breaking contact somewhere in the harness
Moisture inside the battery pack
Developing fault in the battery management unit

What to do

A fault that comes and goes is not a fault that is fixed. Qualified staff should check connectors and wiring carefully, including gently moving them while monitoring live data. Do not clear the code and have it checked soon, because an unstable contact tends to get worse.

How to read code P0B99

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0B99 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (99) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0B99 mean?

HV battery voltage sense circuit S: intermittent or erratic. The hybrid/EV battery control unit saw the signal from sense circuit "S" drop in and out or swing in an unrealistic way. The letter S identifies a monitored cell group, and which one depends on the manufacturer. An intermittent fault like this usually points to a contact that breaks with vibration or temperature changes.

Can I keep driving with code P0B99 active?

With caution: limp mode possible, have it checked soon

Common causes — P0B99

Loose connector or corroded terminals Damaged or chafed sensing wire Vibration breaking contact somewhere in the harness Moisture inside the battery pack Developing fault in the battery management unit

How do you fix code P0B99?

A fault that comes and goes is not a fault that is fixed. Qualified staff should check connectors and wiring carefully, including gently moving them while monitoring live data. Do not clear the code and have it checked soon, because an unstable contact tends to get worse.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes