P0C10 — Motor B inverter power supply voltage too high
| Meaning | The control unit detected an inverter supply voltage for motor B above the expected limits. Excess voltage can damage the power electronics, so the system protects itself by limiting operation. Motor B may differ from brand to brand. |
| Family | Powertrain (P) |
Typical symptoms
Limited power
Reduced or no regenerative braking
The vehicle stops or enters limp mode
Error messages on the dashboard
Common causes
Voltage sensor reading incorrectly
Internal inverter failure
Wiring problem in the supply circuit
Traction battery or battery management anomaly
What to do
How to read code P0C10
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C10 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (10) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C10 mean?
Motor B inverter power supply voltage too high. The control unit detected an inverter supply voltage for motor B above the expected limits. Excess voltage can damage the power electronics, so the system protects itself by limiting operation. Motor B may differ from brand to brand.
Can I keep driving with code P0C10 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C10
Fault in the DC/DC converter or regulation system Voltage sensor reading incorrectly Internal inverter failure Wiring problem in the supply circuit Traction battery or battery management anomaly
How do you fix code P0C10?
Have the car checked at a workshop qualified for high-voltage vehicles, without working on the system yourself. If serious warnings appear or power disappears, stop safely and do not keep driving.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C0F — Motor B inverter power supply voltage too low
- Next code: P0C11 — Motor A inverter phase U over temperature
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open