P0C1A — Motor B delivered torque differs from requested
| Meaning | The control unit detected that the torque actually delivered by electric motor B does not match what was requested. The motor pushes or brakes differently from what the system commands. The role of motor B depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Jerky acceleration
Reduced power or regeneration
Vibration while driving
Limp mode
Common causes
Partial inverter failure
Damaged motor wiring or connectors
Mechanical or electrical problem in the motor
Unstable high-voltage supply
Control unit software needing an update
What to do
How to read code P0C1A
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C1A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (1A) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C1A mean?
Motor B delivered torque differs from requested. The control unit detected that the torque actually delivered by electric motor B does not match what was requested. The motor pushes or brakes differently from what the system commands. The role of motor B depends on the manufacturer.
Can I keep driving with code P0C1A active?
With caution: limp mode possible, have it checked soon
Common causes — P0C1A
Faulty position or current sensor Partial inverter failure Damaged motor wiring or connectors Mechanical or electrical problem in the motor Unstable high-voltage supply Control unit software needing an update
How do you fix code P0C1A?
A diagnosis with live data reading is needed, from a workshop qualified for hybrid or electric vehicles. If you notice sudden loss of thrust, drive carefully and have it checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C19 — Motor A delivered torque differs from requested
- Next code: P0C1B — Auxiliary transmission pump module overheating
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open