P0C1B — Auxiliary transmission pump module overheating
| Meaning | The control unit detected excessive internal temperature in the module that controls the electric transmission fluid pump. This pump keeps fluid pressure up when the combustion engine is off, for example in start-stop or electric driving. With the module too hot, the pump may be limited or stopped. |
| Family | Powertrain (P) |
Typical symptoms
Gearbox reacting slowly after a stop
Harsh or delayed gear engagement
Abnormal noise from the pump
Start-stop or electric driving disabled
Common causes
Transmission fluid level or quality unsuitable
Very high ambient temperature in the compartment
High-resistance electrical connection
Internal failure of the control module
What to do
How to read code P0C1B
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C1B starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (1B) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C1B mean?
Auxiliary transmission pump module overheating. The control unit detected excessive internal temperature in the module that controls the electric transmission fluid pump. This pump keeps fluid pressure up when the combustion engine is off, for example in start-stop or electric driving. With the module too hot, the pump may be limited or stopped.
Can I keep driving with code P0C1B active?
With caution: limp mode possible, have it checked soon
Common causes — P0C1B
Pump or module working hard due to friction or wear Transmission fluid level or quality unsuitable Very high ambient temperature in the compartment High-resistance electrical connection Internal failure of the control module
How do you fix code P0C1B?
Have the transmission fluid level and condition and the pump operation checked at a workshop. If the gearbox shifts badly or with jerks, avoid forcing the drive and don't wait too long.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C1A — Motor B delivered torque differs from requested
- Next code: P0C1C — Auxiliary transmission pump module temperature sen...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open