P0C35 — Hybrid/EV battery temperature sensor F circuit low
| Meaning | The signal from temperature sensor F of the high-voltage battery has too low a voltage. This can mean a short to ground in the wire, a faulty sensor or a control unit problem. The temperature reading is not reliable, so the system may limit the battery as a precaution. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or charging
Battery fan running abnormally
Charge gauge not believable
Limited electric functions
Common causes
Faulty temperature sensor
Wet or corroded connector
Damaged wiring
Faulty battery management unit
What to do
How to read code P0C35
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C35 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (35) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C35 mean?
Hybrid/EV battery temperature sensor F circuit low. The signal from temperature sensor F of the high-voltage battery has too low a voltage. This can mean a short to ground in the wire, a faulty sensor or a control unit problem. The temperature reading is not reliable, so the system may limit the battery as a precaution.
Can I keep driving with code P0C35 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C35
Sensor wire shorted to ground Faulty temperature sensor Wet or corroded connector Damaged wiring Faulty battery management unit
How do you fix code P0C35?
Have the sensor, wire and connector checked with the diagnostic tool, starting from the most accessible parts. The high-voltage battery must only be opened by qualified staff. If you notice power limits, do not delay the repair too long.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C34 — Battery temperature sensor F signal out of range
- Next code: P0C36 — Battery temperature sensor F: signal too high
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open