Skip to content
Fault code dictionary (DTC)

P0C36 — Battery temperature sensor F: signal too high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe hybrid or EV battery control module read a higher than normal voltage on the temperature sensor labeled 'F'. This usually points to an open circuit or a wire touching a voltage source, so the module reads an unrealistic temperature. The letter F refers to a specific position in the battery pack, but which one depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Hybrid or EV system warning light on the dashboard
Reduced power or limp mode
Battery cooling fan running more than usual
Slower or interrupted charging
Reduced electric range

Common causes

Corroded or loose sensor connector
Broken or damaged wire in the battery pack harness
Faulty temperature sensor
Chafed wiring touching a voltage source
Battery control module fault, less common

What to do

Have the car checked by a shop qualified for hybrid or electric vehicles: the battery pack works at high voltage and must not be opened by unqualified people. Don't wait too long, because without a reliable reading the control module limits the battery to protect it.

How to read code P0C36

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0C36 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (36) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0C36 mean?

Battery temperature sensor F: signal too high. The hybrid or EV battery control module read a higher than normal voltage on the temperature sensor labeled 'F'. This usually points to an open circuit or a wire touching a voltage source, so the module reads an unrealistic temperature. The letter F refers to a specific position in the battery pack, but which one depends on the manufacturer.

Can I keep driving with code P0C36 active?

With caution: limp mode possible, have it checked soon

Common causes — P0C36

Corroded or loose sensor connector Broken or damaged wire in the battery pack harness Faulty temperature sensor Chafed wiring touching a voltage source Battery control module fault, less common

How do you fix code P0C36?

Have the car checked by a shop qualified for hybrid or electric vehicles: the battery pack works at high voltage and must not be opened by unqualified people. Don't wait too long, because without a reliable reading the control module limits the battery to protect it.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes