P0C39 — DC/DC converter: temperature sensor A reading implausible
| Meaning | The control module gets a value from the DC/DC converter's temperature sensor 'A' that doesn't match the other temperatures or the operating conditions. The electrical signal is there, but the reading isn't believable. It could be the sensor, but also a real cooling problem in the converter. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power when the car is hot
Cooling fan or pump working hard all the time
12 V battery that struggles to charge
Overheating messages on the display
Common causes
Converter cooling circuit low on coolant or with air in it
Weak cooling pump
Resistive contact in the sensor connector
Converter actually overheating because of an internal fault
What to do
How to read code P0C39
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C39 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (39) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C39 mean?
DC/DC converter: temperature sensor A reading implausible. The control module gets a value from the DC/DC converter's temperature sensor 'A' that doesn't match the other temperatures or the operating conditions. The electrical signal is there, but the reading isn't believable. It could be the sensor, but also a real cooling problem in the converter.
Can I keep driving with code P0C39 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C39
Temperature sensor reading inaccurately Converter cooling circuit low on coolant or with air in it Weak cooling pump Resistive contact in the sensor connector Converter actually overheating because of an internal fault
How do you fix code P0C39?
First check the coolant level of the electronics cooling system with the car off and cold, and that the fan works. Then have the scan tool show whether the temperature it reads is real; do it soon, because a converter that is really running hot can get damaged.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C38 — DC/DC converter: temperature sensor A circuit faul...
- Next code: P0C3A — DC/DC converter: temperature sensor A signal too l...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open