P0C38 — DC/DC converter: temperature sensor A circuit fault
| Meaning | The control module found an electrical problem in the circuit of temperature sensor 'A' in the DC/DC converter, the part that steps the high-voltage battery down to 12 V for the car's electrical system. The code is generic and does not say whether it is a short or an open circuit. Exactly which sensor the letter refers to is set by the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
12 V battery that discharges or charges poorly
Limited power
Lights or displays that dim at times
Cooling fan running hard
Common causes
Damaged wiring near the converter
Faulty temperature sensor
Internal fault in the converter unit
Fault in the module reading the signal, rare
What to do
How to read code P0C38
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C38 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (38) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C38 mean?
DC/DC converter: temperature sensor A circuit fault. The control module found an electrical problem in the circuit of temperature sensor 'A' in the DC/DC converter, the part that steps the high-voltage battery down to 12 V for the car's electrical system. The code is generic and does not say whether it is a short or an open circuit. Exactly which sensor the letter refers to is set by the manufacturer.
Can I keep driving with code P0C38 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C38
Corroded or loose sensor connector Damaged wiring near the converter Faulty temperature sensor Internal fault in the converter unit Fault in the module reading the signal, rare
How do you fix code P0C38?
Have a shop qualified for hybrid or electric cars read the converter's live data: it is connected to high voltage and should not be taken apart by yourself. If you notice the 12 V battery going flat, don't put it off, because the car may fail to start.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C37 — Battery temperature sensor F: unstable signal
- Next code: P0C39 — DC/DC converter: temperature sensor A reading impl...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open