P0C44 — Battery pack coolant temperature sensor A: signal too low
| Meaning | The control module read a lower than expected voltage on battery coolant sensor 'A'. This usually points to a wire or sensor shorted to ground, and the module may see a falsely very high temperature. Which point in the circuit the letter A refers to depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Power limited as protection
Fan or pump at full speed
Slowed charging
High temperature warning even when cold
Common causes
Connector with moisture
Shorted sensor
Damaged wiring
Battery control module fault, rare
What to do
How to read code P0C44
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C44 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (44) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C44 mean?
Battery pack coolant temperature sensor A: signal too low. The control module read a lower than expected voltage on battery coolant sensor 'A'. This usually points to a wire or sensor shorted to ground, and the module may see a falsely very high temperature. Which point in the circuit the letter A refers to depends on the manufacturer.
Can I keep driving with code P0C44 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C44
Chafed sensor wire touching ground Connector with moisture Shorted sensor Damaged wiring Battery control module fault, rare
How do you fix code P0C44?
Have a technician qualified for high voltage check the wiring and sensor connector. Also check the coolant level when cold, but don't work on the battery pack yourself.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C43 — Battery pack coolant temperature sensor A: implaus...
- Next code: P0C45 — Battery pack coolant temperature sensor A: signal...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open