Skip to content
Fault code dictionary (DTC)

P0C45 — Battery pack coolant temperature sensor A: signal too high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control module read a higher than normal voltage on battery coolant sensor 'A'. This usually means a broken wire, an unplugged connector or contact with a voltage source, and the reading looks like a very low, unrealistic temperature. What the letter A refers to is set by the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Hybrid or EV warning light on
Reduced power
Battery cooling not starting when needed
Uneven charging
Fault more frequent with vibration

Common causes

Loose or corroded connector
Broken wire
Faulty sensor
Wiring touching a voltage source
Battery control module fault, rare

What to do

Have a qualified technician check the connector and wire continuity: it is often a contact problem. With a sensor reading cold, cooling may not start when needed, so avoid pushing the car hard until it has been checked.

How to read code P0C45

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0C45 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (45) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0C45 mean?

Battery pack coolant temperature sensor A: signal too high. The control module read a higher than normal voltage on battery coolant sensor 'A'. This usually means a broken wire, an unplugged connector or contact with a voltage source, and the reading looks like a very low, unrealistic temperature. What the letter A refers to is set by the manufacturer.

Can I keep driving with code P0C45 active?

With caution: limp mode possible, have it checked soon

Common causes — P0C45

Loose or corroded connector Broken wire Faulty sensor Wiring touching a voltage source Battery control module fault, rare

How do you fix code P0C45?

Have a qualified technician check the connector and wire continuity: it is often a contact problem. With a sensor reading cold, cooling may not start when needed, so avoid pushing the car hard until it has been checked.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes