P0C47 — Battery coolant pump A: control circuit open or faulty
| Meaning | The control module drives pump 'A', which circulates coolant through the hybrid or EV battery pack, and it found the control circuit open or not responding as it should. The code points to an electrical control problem and doesn't say by itself that the pump is broken. Which pump is A is defined by the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power
Battery temperature rising more than normal
Slowed or interrupted charging
Pump not heard running when the car is ready
Common causes
Broken control wire
Fuse or relay feeding the pump
Failed pump
Control module fault, rare
What to do
How to read code P0C47
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C47 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (47) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C47 mean?
Battery coolant pump A: control circuit open or faulty. The control module drives pump 'A', which circulates coolant through the hybrid or EV battery pack, and it found the control circuit open or not responding as it should. The code points to an electrical control problem and doesn't say by itself that the pump is broken. Which pump is A is defined by the manufacturer.
Can I keep driving with code P0C47 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C47
Corroded or loose pump connector Broken control wire Fuse or relay feeding the pump Failed pump Control module fault, rare
How do you fix code P0C47?
Have a shop qualified for hybrid or electric vehicles check the fuse, connector and pump operation. If the pump doesn't run, the battery isn't cooled properly: avoid using the car for long trips or under heavy load until it has been checked.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C46 — Battery pack coolant temperature sensor A: unstabl...
- Next code: P0C48 — Battery coolant pump A: control circuit low
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open