P0C48 — Battery coolant pump A: control circuit low
| Meaning | The control module detected a lower than expected voltage on the control circuit of battery coolant pump 'A'. This usually means a wire shorted to ground, or a pump drawing current abnormally. The exact meaning of the letter A depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Pump not starting or running poorly
Battery temperature higher than normal
Limited power
Slowed charging
Common causes
Connector with moisture or residue
Pump with shorted winding or seized
Blown fuse
Control module fault, rare
What to do
How to read code P0C48
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C48 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (48) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C48 mean?
Battery coolant pump A: control circuit low. The control module detected a lower than expected voltage on the control circuit of battery coolant pump 'A'. This usually means a wire shorted to ground, or a pump drawing current abnormally. The exact meaning of the letter A depends on the manufacturer.
Can I keep driving with code P0C48 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C48
Control wire shorted to ground Connector with moisture or residue Pump with shorted winding or seized Blown fuse Control module fault, rare
How do you fix code P0C48?
Have a qualified technician check the wiring, connector and pump. If the pump doesn't run, battery cooling is compromised: don't keep using the car hard, and don't put it off.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C47 — Battery coolant pump A: control circuit open or fa...
- Next code: P0C49 — Battery coolant pump A: control circuit high
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open