P0C4D — Battery coolant pump A: supply voltage too high
| Meaning | The control unit detects a higher-than-expected voltage at pump A, which circulates coolant for the battery. Excess supply voltage can damage the pump or the unit that drives it. The system may limit power for safety. |
| Family | Powertrain (P) |
Typical symptoms
Noisy pump or abnormal running
Limited power
Other electrical fault messages on board
Poor battery temperature control
Common causes
Incorrect 12 V voltage regulation (converter or alternator)
Faulty pump control unit
Damaged connector with wires touching
Internal pump fault
What to do
How to read code P0C4D
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C4D starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (4D) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C4D mean?
Battery coolant pump A: supply voltage too high. The control unit detects a higher-than-expected voltage at pump A, which circulates coolant for the battery. Excess supply voltage can damage the pump or the unit that drives it. The system may limit power for safety.
Can I keep driving with code P0C4D active?
With caution: limp mode possible, have it checked soon
Common causes — P0C4D
Short to a power supply in the pump wiring Incorrect 12 V voltage regulation (converter or alternator) Faulty pump control unit Damaged connector with wires touching Internal pump fault
How do you fix code P0C4D?
Have the 12 V system voltage and the pump wiring checked, because high voltage can damage other components. Do not ignore it. Get it inspected with some urgency.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C4C — Battery coolant pump A: supply voltage too low
- Next code: P0C4E — Drive motor A: position exceeded learning limit
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open