P0C56 — Motor B position sensor circuit A: signal out of range
| Meaning | The signal from circuit A of the position sensor on drive motor B is present but not plausible: out of range or inconsistent with what the control unit expects. The rotor position is therefore unreliable. The system may limit power. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power
Rough or jerky driving
Noise or vibration from the motor
Difficulty starting
Common causes
Faulty resolver or degraded signal
Wiring with abnormal resistance or noise
Sensor mount loosened after a repair
Inverter or control unit misreading the signal
What to do
How to read code P0C56
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C56 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (56) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C56 mean?
Motor B position sensor circuit A: signal out of range. The signal from circuit A of the position sensor on drive motor B is present but not plausible: out of range or inconsistent with what the control unit expects. The rotor position is therefore unreliable. The system may limit power.
Can I keep driving with code P0C56 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C56
Sensor mounted incorrectly or shifted Faulty resolver or degraded signal Wiring with abnormal resistance or noise Sensor mount loosened after a repair Inverter or control unit misreading the signal
How do you fix code P0C56?
Have the sensor mounting and connections checked and the signal compared with reference values. If you notice power loss or vibration, use the car less. It is best to act soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C55 — Drive motor B position sensor: circuit A fault
- Next code: P0C57 — Motor B position sensor circuit A: signal low
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open