P0C71 — Battery temperature sensors D and E: readings do not agree
| Meaning | The traction battery control unit compares the readings of temperature sensors D and E, which should show similar values. It found a difference too large to be normal. It may be a sensor reading wrongly or a real temperature imbalance in the battery pack. |
| Family | Powertrain (P) |
Typical symptoms
Limited power or slower charging
Battery cooling fan running constantly or noisy
Reduced electric range
Reduced-power mode in some cases
Common causes
Damaged sensor connector or wiring
Insufficient cooling in one part of the battery pack
Dirty or blocked cooling fan or air ducts
Problem in the battery management unit
What to do
How to read code P0C71
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C71 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (71) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C71 mean?
Battery temperature sensors D and E: readings do not agree. The traction battery control unit compares the readings of temperature sensors D and E, which should show similar values. It found a difference too large to be normal. It may be a sensor reading wrongly or a real temperature imbalance in the battery pack.
Can I keep driving with code P0C71 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C71
Faulty or misreading temperature sensor Damaged sensor connector or wiring Insufficient cooling in one part of the battery pack Dirty or blocked cooling fan or air ducts Problem in the battery management unit
How do you fix code P0C71?
Have the battery cooling fan, air ducts and cooling filter checked first, then the sensors and wiring. Do not ignore this code, because battery temperature is a safety-related reading. Do not clear it without finding the cause.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C70 — Battery temperature sensors C and D: readings do n...
- Next code: P0C72 — Hybrid/EV battery temperature sensors E and F disa...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open