P0C72 — Hybrid/EV battery temperature sensors E and F disagree
| Meaning | The battery control unit compares two temperature sensors, called E and F, that should read similar values. It found a difference between them that is too large. This does not necessarily mean the battery is truly hot; one sensor may simply be reading wrong. Which physical location E and F refer to depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or a protection mode
Battery cooling fan running more than usual
Reduced electric range
Limited charging or regenerative braking
Common causes
Corroded or loose sensor connector or wiring
Sensor refitted badly after work on the battery
Uneven battery cooling (fan, ducts, coolant)
Fault in the battery management control unit
What to do
How to read code P0C72
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C72 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (72) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C72 mean?
Hybrid/EV battery temperature sensors E and F disagree. The battery control unit compares two temperature sensors, called E and F, that should read similar values. It found a difference between them that is too large. This does not necessarily mean the battery is truly hot; one sensor may simply be reading wrong. Which physical location E and F refer to depends on the manufacturer.
Can I keep driving with code P0C72 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C72
Temperature sensor E or F reading incorrectly Corroded or loose sensor connector or wiring Sensor refitted badly after work on the battery Uneven battery cooling (fan, ducts, coolant) Fault in the battery management control unit
How do you fix code P0C72?
Have a scan tool read the temperatures of all battery sensors on a cold vehicle and compare them: the one that stands out points to the problem. Do not open the battery or touch the orange cables, because high voltage is dangerous and needs a qualified technician. You can drive with care, but the car should be checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C71 — Battery temperature sensors D and E: readings do n...
- Next code: P0C73 — Power electronics coolant pump A: control performa...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open