P0C74 — Power electronics coolant pump B: control performance fault
| Meaning | The control unit commanded pump B, which circulates coolant through the power electronics, and the response does not match what was expected. It is the same kind of fault as the pump A code, but for a second pump. Which circuit pump B serves depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power in hot weather or on hills
Hybrid system temperature warning
Unusual noise from the pump area
Cooling fans very active
Common causes
Low coolant level or air in the circuit
Damaged pump wiring or connector
Blockage in hoses or radiator
Fault in the control output of the control unit
What to do
How to read code P0C74
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C74 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (74) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C74 mean?
Power electronics coolant pump B: control performance fault. The control unit commanded pump B, which circulates coolant through the power electronics, and the response does not match what was expected. It is the same kind of fault as the pump A code, but for a second pump. Which circuit pump B serves depends on the manufacturer.
Can I keep driving with code P0C74 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C74
Worn or seized pump B Low coolant level or air in the circuit Damaged pump wiring or connector Blockage in hoses or radiator Fault in the control output of the control unit
How do you fix code P0C74?
Check the coolant level of the power electronics circuit and listen for the pump starting with the car on. If an overheating warning appears, stop and let the car cool before moving on. Any work on the orange high-voltage components needs a qualified technician.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C73 — Power electronics coolant pump A: control performa...
- Next code: P0C75 — High-voltage system discharge time too short
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open